INTERACT AT

INTERACT AT

A complete conference room solution with flexibility in mind. The INTERACT AT includes all the necessary audio equipment and peripherals for any
conference room while delivering exceptional audio quality at an affordable price.

Customize your solution with multiple microphones and speaker options, direct connection to enterprise telephones, USB audio, plus the ability to connect to the rich-media systems.

Description

+ Enables Unified Communication in the conference room
+ USB port connects to PC for Skype, WebEx and other A/V conferencing applications
+ Headset port connects to Cisco, Avaya, and Nortel handsets
+ Sound quality exceeds traditional conference phone with ClearOne’s HDConference technology
> Simplified installation combines all microphone signals onto a single data cable minimizing conduit and raceway requirements.
> Noise cancellation reduces background noises from fans or HVAC systems
> Automatic level controls keep participants’ audio balanced and consistent
+ Scalable and flexable
> Multiple speaker mount options: wall, ceiling or custom
> Select appropriate number of MIC EX and MIC PODS (max three) to fit the applications
+ Integral network management system enables remote configuration, control and monitoring
+ Interoperates with NetStreams® A/V over IP systems
+ Easy to install, program and use

Specification
AUDIO PERFORMANCE

Conditions: Unless otherwise specified, all measurements are performed from 20 Hz to 15 kHz BW limit (No Weighting)
Dynamic Range:
> 80 dB (Non-A Weighted) THD+N: < 0.02%
AUDIO MIXER

AEC Tail Time: 128 ms
Adaptive Noise Cancellation: 6-15 dB
Gating: Adaptive Ambient, 1st Mic Priority, Lookahead Gating
Up to a total of 3 INTERACT MIC or INTERACT
MIC EX devices can be connected to the
INTERACT AT Mixer
48 kHz Sample Rate, 24-bit Resolution
AUDIO MIXER LINE INPUT

Connection: Unbalanced RCA
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +9 dBu
AUDIO MIXER PLAYBACK

Connection: Unbalanced Left and Right RCA (Summed Internally)
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +15 dBu
AUDIO MIXER LINE OUTPUT

Connection: Unbalanced RCA
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +9 dBu
AUDIO MIXER RECORD OUTPUT

Connection: Unbalanced Left and Right RCA (Mono Source Split Internally)
Impedance: 10 kΩ
Nominal Level: -10 dBu
Maximum Level: +9 dBu
AUDIO MIXER AMPLIFIER OUTPUT

Connection: Left and Right Push Terminals
Power: 5 Watts
Frequency Response: 20 Hz – 15 kHz (+/-1 dB)
Dynamic Range:
> 80 dB THD+N: < 0.50%
(+5 dBu Line Input @ 1 kHz)
TELEPHONE INTERFACE

Telephone Audio Performance
Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled

Frequency Response:
250 Hz to 3.3 kHz ±1 dB THD+N: < 0.30%
re-max level 250 Hz to 3.3 kHz
SNR: > 62 dB re-max level

Telco Line Echo Cancellation
Tail Time: 32 ms
Null: 55 dB Nominal

Telephone Noise Cancellation
Noise Cancellation 6-15 dB Attenuation
RS-232 CONTROL PORT

DB9 Female
Baud Rates: 9,600 / 19,200 / 38,400 / 57,600 (Default) / 115,200
Protocol: 8 Bit / 1 Stop / No Parity Hardware Flow Control ON (Default)/OFF
USB CONFIGURATION PORT

USB 2.0 Compatible
Type: B Connector
VISCA CAMERA PORT

Din, 9600 Baud, No Flow Control
LAN

10/100 Ethernet
RJ-45 with Activity LED
Supports: Telnet, HTTP
LINK BUS

Connection: RJ-45 with CAT5 Daisy-chained
Maximum Distance: 60 feet from Mixer to last device in chain
Maximum Number of INTERACT MIC Devices: 3 – Any Mix of INTERACT MIC or MIC EX
Maximum Number of INTERACT COM Devices: 1 per INTERACT Mixer
CONFIGURATION SOFTWARE

INTERACT Supports: Microsoft XP, Vista and Windows 7
INTERACT COM

USB AUDIO CHANNEL: USB 2.0 Compatible
Connector: Mini Type B
TX and RX Channel, 16-bit at 16 kHz

HEADSET AUDIO CHANNEL:
Connector: RJ-9
Supported Telephone Sets: Most Cisco, Avaya, and Nortel Phones

Audio Performance:
Frequency Response: 40 to 3300 Hz
THD and Noise: < 0.04% re-max level with 0 dB Gain @ 1 kHz
Dynamic Range: > 84 dB (Non A-Weighted)

Audio Processing:
Receive Automatic Level Control
Line Echo Cancellation for Side-Tone
Elimination

GPIO:
Pin 1: Global Mute (C)
Pin 2: Global Mute (S)
Pin 3: ON/OFF Hook (C)
Pin 4: ON/OFF Hook (S)
Pin 5: 5V DC up to 40 mA
INTERACT MIC – TABLETOP MICROPHONE

Coverage: 360°
Frequency Response:
60 Hz – 14 kHz THD+N: < 0.08% (-45 dBu Input @ 1 kHz)
Sensitivity: -45 dBu
INTERACT MIC EX - MICROPHONE DISTRIBUTION BOX

Connection: Female XLR Balanced
Maximum Level :+18 dBu
Frequency Response: 20 Hz – 15 kHz THD + N: < 0.01%
Phantom Power: 24 V @ 10 mA
Impedance: 5 kΩ per Leg or 10 kΩ Balanced
POWER SUPPLY

Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
Power Consumption: 32 W Maximum
DIMENSIONS (W X D X H)

INTERACT AT Mixer: 17” x 7.5” x 2” (43.2 cm x 19.1 cm x 5.1 cm)
INTERACT MIC EX: 4.7” x 5.6” x 1.7” (11.9 cm x 14.3 cm x 4.4 cm)
INTERACT COM: 4.7” x 5.6” x 1.7” (11.9 cm x 14.3 cm x 4.4 cm)
INTERACT MIC: Diameter: 7” (17.8 cm)
Height: 1.5” (3.8 cm)
WEIGHT

INTERACT AT Mixer: 4.5 lbs. (2.25 kg)
INTERACT MIC: 1.5 lbs. (0.75 kg)
INTERACT MIC EX: 1.5 lbs. (0.75 kg)
INTERACT COM: 1.5 lbs. (0.75 kg)
COMPLIANCE

ROHS Compliant
WEEE Compliant
UL Safety Listed
AES48-2005 AES Standard on Grounding and
EMC Practice
PART NUMBERS

Complete Room Solutions: Call ClearOne for complete listing of room options.
INTERACT AT: 910-154-010
INTERACT COM: 910-154-030
INTERACT MIC: 910-154-015
INTERACT MIC EX: 910-154-020
ClearOne Wall Speaker: 910-151-002-01
ClearOne Ceiling Speaker: 910-151-001-01

Related products

1